What doesn't the make Belt CP carbon fiber edition stand out. With every upgradeable part already installed (carbon fiber frame, tail boom, blades paddles and fins, all metal head parts, swashplate and blade grips, and a fiberglass canopy) the carbon fiber Belt CP is the ultimate 450 sized park flyer.
The Carbon Fiber Belt CP comes installed with a premium CCPM Head. CCPM stands for Cyclic/Collective Pitch Mixing. This provides precision flying by utilizing three electronically mixed servos, which offers increased response over traditionally mixed servos. Working together as a team, the three servos control the input for the collective pitch, elevator and aileron. This advanced system achieves these controlled responses without unnecessary components due to the advanced technology built-in to the Belt CP's 6-channel transmitter.
Other notable features include the an Idle Up 1 mode, which uses the Belt Cp's high performance motor to allow for sport flying and even inverted flight. And a precision machined tailboom which allows for a perfect 90 degree alignment of the tail rotor and main motor with any need for adjustments. With the included battery pack fully charged, 8- to 10-minute flights can easily be achieved.
In our personal opinion, this Belt CP is perfect.
Features
- 2.4 GHz 6-Channel Spread Spectrum Transmitter
- High precision metal rotating head and CCPM system.
- High-performance carbon fiber main blade.
- Light weight, high strength fibre glass sideboard.
- Tail servo alloy fixed seat and Carbon tail boom.
- High Precision tail rotor control set, carbon fiber tail rotor blade unit.
- Super Iron Main Shaft
- High Rigidity Aluminum Tail Boom
- Super Iron Landing Skids
- High Strength Carbon Fiber Tail Boom Support Set
- 6 Channel R/C Set included, Complete Forward/Backward, Left/Right, Up/Down Pitch Control
- New 6 channel Transmitter with PIT and PLT mode lock switch and adjustable knob
- Improved Body Frame(Strong Light)
- Improved Blades Give Superior Lift. To reduct damage during impact, they pop off
- Perfect for intermediate pilots or pilots who want to try inverted fly or 3D aerobatic flight
- CCPM mixing control system and collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
- Bell-Heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic response
- O-ring inside the center hub reduce oscillation of main blades
- High Quality One-Way Bearing Allows for Autorotation Landings
- Adjustable Battery Support, Improved Flight Characteristics
- No Tail Motor - Belt Driven Tail Rotor Provides Stable Flight and Low Noise
- Professional Gyro
- Lightened Skid Set, Main Gear, Main Frame and Canopy Reduce Load and Improves Flight
- PCM Receiving and Transmitting System Increase Operation Stability
- Precision Controlling and Hovering
- Approximately 20 minute Flight Time on Each Charge
In Depth
- Length: 650mm
- Height: 230mm
- Main Rotor Blades diameter: 680mm
- Tail Rotor Blades diameter : 130mm
- Flight Weight: 670g
- Empty Weight: 340g
- Motor: 450 3800KV brushless motor
- Rotate Ratio: 12:140/10:22
- ESC: 25A Digital Proportional brushless speed controller
- Gyro: ESKY professional gyro
- Servo: 8g*4Pcs
- Transmitter: 6-channel
- Receiver: 6-channel
- Battery: Li-poly Battery 1800mAh, 20C, 11.1V
- Mixing: CCPM mode with adjustable pitch system and 3D conversion
- Blades: Light and hardened wood blades provide great lift, only weight 11g
- Assembly: 100% assembled -- 8 AA batteries for the transmitter also included)
In the Box
- Helicopter Carbon Fiber Body (All Blades & Paddles in Carbon Fiber), Metal Main Rotor
- Carbon Fiber Blades (EK4-0015)
- BELT CP 6 CH RC HELICOPTER
- 6 Channel CCPM Multifunctional FM R/C Transmitter
- MODE 2, 110V, 2.4Ghz
- Powerful Brushless Motor
- 100-240V Wall Battery Balance Charger with Auto Cut-Off
- Brushless Motor
- 4 x 7.5G Servos
- Receiver
- 1800MAH 11.1V 20C LIPO BATTERY
- Instruction Manual
Required
- Everything needed is included!
