The 10R5-Oval is built on a 2.5mm woven carbon fiber chassis that utilizes a T-plate and 3-shock setup to suspend the newly designed rear pod. Optimized for brushless, the new rear pod features a 3-point upper pod plate with an aluminum stand-off that increases stiffness and dissipates heat by transferring the heat from the motor mount to the left rear bulkhead, keeping the motor cooler throughout the run. RC10R5-Oval Factory Team features: • Updated active strut front end features symmetrical components with independently adjustable caster and track width, as well as in-line front axles • Woven carbon fiber front arm mounting plate makes for a stiffer front end assembly featuring Indexed wheelbase options and an automatic 0.5mm (0.020”) trail in right front • Newly designed rear pod features a 3-point upper pod plate with an aluminum stand-off that increases stiffness and dissipates heat by transferring the heat from the motor mount to the left rear bulkhead • 3-point upper pod plate is more open, allowing easier access and installation of brushless motors • Full ball-bearing drivetrain • Ultra-rigid one-piece 2.5mm woven carbon fiber chassis allows for both LiPo and NiMh cells, featuring indexed battery adjustments for LiPo packs • Factory Team side shocks feature a through-shaft design making for equal damping with no rebound in both directions • VCS2 bladder style center shock provides consistent damping and easy maintenance • Woven carbon fiber center shock tower allows for incremental adjustments of rear spring rate • Ball differential and IRS™ graphite rear axle • Foam front bumper helps protect body and chassis during impact • Servo mounts flat for a lower CG and includes Ackermann adjustment spacers • Updated T-plate sockets and hard-anodized aluminum pivot balls give the 10R5-Oval a lower rear roll center for better rear traction
In Depth
- Scale:: 1/10
- Width:: 195mm / 7.68" (Front), 205mm / 8.07" (Rear)
- Wheelbase:: 262.75mm-270.25mm / 10.34"-10.64" (Right), 260.75mm-270.75mm / 10.27"-10.66" (Left)
- Weight:: 565g
- Drive Train:: 2WD, RWD
Required
-
-R/C two channel surface frequency radio system with steering servo
-AA-sized batteries for transmitter
-4-6 cell NiMh battery pack or 1-3 cell LiPo battery pack
-Battery charger (we recommend a peak detection charger)
-Electronic Speed Control (ESC)
-R/C electric motor
-64 pitch pinion gear (size to be determined by type and wind of motor selected)
-1:10 scale lexan oval body
-Lexan specific spray paint
-1:10 scale oval foam tires