Xenon Project is no longer in operation.

This website is maintained as reference material and a reminder
of a time before tech monopolies ruined the internet
and coronavirus ruined everything else.
Call us at 888-XENONRC | Open 10AM to 5PM PST Monday-Friday Contact | Support | Blog | Customer Login Big Cut STD 2 Blade 3
RC Helicopters, RC Cars, RC Airplanes, RC Trucks, RC Boats & RC Toys
You are here: Home > RC Airplanes > RC Airplane Parts > Spinners & Hub Nuts > Big Cut STD 2 Blade 3" Spinner

Big Cut STD 2 Blade 3" Spinner

Big Cut STD 2 Blade 3" Spinner

CLICK TO ENLARGE

Big Cut STD 2 Blade 3" Spinner

HH-DUB398 by Dave Brown Products

Retail Price: $31.95
You Save $3.19 (10%)

$28.76

Out Of Stock - Check back soon or join our waitlist!

Are you tired of having to pay through the nose for a top quality aluminum spinners? We are too and we have done something about it. Vortech spinners are manufactured by Dave Brown Products - right in our own factory.

Our “Big Cut” Vortech Spinners begin with the 3” diameter and include all sizes up to 6”. Each of the Vortech styles (Standard, Parabolic, Ultimate and FAI) are included as Big Cut Spinners.
These spinners have larger cut-outs than our other styles so they comfortably fit much larger propellors.
In all styles of our "Big Cut" spinners, use the following guideslines:

3" are cut for 16x8 APC or similar props
3 1/4" & 3 1/2" are cut for 20x10 Menz/Mejzlik or similar props
4" & 4 1/2" are cut for 24x10 Menz/Mejzlik or similar props
5" & 5 1/2" are cut for 26x10 Menz/Mejzlik or similar props
6" are cut for 30x10 Menz/Mejzlik or similar props

Features

  • Vortech spinners are spun from Aluminum sheet - not molded/cast from brittle material, or machined out of expensive bar stock
  • Precision CNC machined to exacting tolerances
  • Designed to be strong, yet light weight
  • Spinner cone locks into backplate to stop spinner cone expansion
  • Backplate is knurled for positive grip between engine’s drive washer and your propeller
  • All Vortech Spinners start life the same way - as a flat piece of aluminum sheet which has a CNC machined tip pressed into the center
  • This disk is then, spin-formed to shape and turned to high precision
  • After the cone is machined, it is polished to a beautiful reflective finish
  • Vortech spinners have cutouts with clearance for popular sizes of props

Review Summary

This product is covered by our limited warranty policy. We stand behind our products and all items are guaranteed to be in working order and fully functional. Any items found to be defective upon arrival will be repaired or replaced free of charge within 60 days of purchase.

Returns or exchanges of new and unused products will also be accepted up to 60 days after the date of purchase.

XenonProject.com 11312 Orchard St. Unit A. El Monte, CA 91731 USA  |  888-XENONRC (888-936-6672) M-F 10AM to 5PM PST© 2012 XenonProject.com
For full size Performance Car Parts, check out our affiliate Silicone Intake Systems.
Big Cut STD 2 Blade 3" Spinner Big Cut STD 2 Blade 3" Spinner