The E-flite® 5-Amp Pro Brushless ESC has been designed for use in radio control aircraft and to support continuous currents of up to 5 amps when using 2 Li-Po battery packs and up to 4 sub-micro servos. Standard features include advance BEC and safe power arming along with programmable features such as low-voltage cutoff, braking, timing and throttle input range.
Features
- Up to 5-amp continuous current with proper air flow
- Drives up to 4 sub-micro servos on 2S
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low-voltage cutoff with settings for 2-cell Li-Po or 74% of battery starting voltage
- Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
- Soft start
- Auto motor shut down if signal is lost or there is interference
- Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
- Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
In Depth
- Brake: Yes - Programmable
- Continuous Maximum Current: 5A
- Momentary Peak Current: 6A (15 sec)
- Length: 1.0 in (25mm)
- Width: 0.67 in (17mm)
- Height: 0.27 in (7.0mm)
- Weight: 0.28 oz (8g)
- Wire Gauge: 22AWG with JST connector on battery input leads or 22AWG with 2mm female gold bullet connectors on motor output leads
- Cells w/BEC: 2–3S Li-Po or 6–7 cell Ni-MH/Ni-Cd