Ideal for 3D models 6–9 oz (170–255 g), and sport and scale models 8–12 oz (225–340 g) or models requiring up to 85 watts of power.
Features
- Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
- High-torque, direct-drive alternative to inrunner brushless motors
- Ideal for models requiring up to 85 watts of power
- Integrated prop saver design
- Mount, prop adapter and hardware included
- External rotor design with 3.2mm shaft
- Low noise level
In Depth
- Type: Brushless outrunner
- Size: 180/280 replacement
- Bearings or Bushings: Two 3.175 x 7.94 x 3.6mm Bearings
- Recommended Prop Range: 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
- Voltage: 7.2–11.1V
- RPM/Volt (Kv): 1380
- Resistance (Ri): .33 ohms
- Idle Current (Io): .40A @ 8V
- Continuous Current: 7A
- Maximum Burst Current: 9A (15 sec)
- Cells: 6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
- Speed Control: 8–10A brushless
- Weight: 24 g (.8 oz)
- Overall Diameter: 28mm (1.10 in)
- Shaft Diameter: 3.17mm (1/8 in)
- Overall Length: 22mm (.90 in)
Required
-
8A–10A Brushless ESC
6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
