The Mini Funtana X™ is another in E-flite’s outstanding line of electric RC aircraft and accessories. E-flite uses top-quality engineering and materials in everything they make, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby, so your electric flight experience is always a positive one.
To create the new Mini Funtana X ARF, E-flite began with the proven 3D benefits of the original Mini Funtana design. From there, they increased the wing area, added wing fillets and optional Side Force Generators, resulting in an airplane that excels in high-alpha and all-around maneuverability. Outfitted
with an E-flite® Park 480 brushless outrunner, the Mini Funtana X is capable of superb vertical performance.
Features
- Tapered thickness airfoil for improved aerodynamic performance
- Optional Side Force Generators (SFG's) included
- Designed for use with E-flite’s Park 480 Brushless Outrunner Motor
- Balsa/lightweight plywood construction covered in genuine UltraCote®
- Wing fillets
- Aluminum landing gear and steerable tail wheel
- Easy-access magnetic battery hatch
- Factory-painted fiberglass cowl and wheel pants
- Assembles in just a few evenings
- Generous wing area for lighter wing loading—26% larger than original Mini Funtana
- Large control surfaces for precise control in high-alpha flight
In Depth
- Wingspan: 43 in (1092mm)
- Overall Length: 40.5 in (1028mm)
- Wing Area: 447 sq in (28.8 sq dm)
- Flying Weight: 27–29 oz (765–822 g)
- Motor Size: Park 480 BL outrunner
- Radio: 6-channel Tx and micro Rx
- Servos: 4 sub-micro
- Trim Scheme Colors: True Red (HANU866), White (HANU870), Deep Blue (HANU873), Silver (HANU881)
- CG (center of gravity): 3.75 in (95mm) behind the leading edge
- Prop Size: 12x6 electric
- Hardware Included: Yes
- Speed Control : 40A brushless
- Recommended Battery: 11.1V 3-cell 2100mAh LiPo
- Control Throw (Ailerons): Low 1" (25mm) Up/Down or High 1 7/8" (48mm) Up/Down
- Control Throw (Elevator): Low 3/4" (19mm) Up/Down or High 2 5/16" (58mm) Up/Down
- Control Throw (Rudder): Low 1 3/4" (45mm) Left/Right or High 2 3/4" (70mm) Left/Right
- Approx. Assembly Time: 4 hours
Required
-
6-channel transmitter (for proper mixing and dual rate capabilities)
Micro receiver
4 sub-micro servos
Motor
40A brushless ESC
12x6 electric prop
Battery & charger