What makes the Belt CP stand out is the premium features included on this helicopter at a standard price.
The stock Belt CP comes installed with a premium CCPM Head. CCPM stands for Cyclic/Collective Pitch Mixing. This provides precision flying by utilizing three electronically mixed servos, which offers increased response over traditionally mixed servos. Working together as a team, the three servos control the input for the collective pitch, elevator and aileron. This advanced system achieves these controlled responses without unnecessary components due to the advanced technology built-in to the Belt CP's 6-channel transmitter.
Other notable features include the an Idle Up 1 mode, which uses the Belt Cp's high performance motor to allow for sport flying and even inverted flight. And a precision machined tailboom which allows for a perfect 90 degree alignment of the tail rotor and main motor with any need for adjustments. With the included battery pack fully charged, 8- to 10-minute flights can easily be achieved.
In our personal opinion, the Belt CP is the perfect park or late night parking lot flyer. As a side note, the Belt's box doubles as the perfect transport box. You only need to grab one box that includes everything for a wonderful flight experience.
Features
- 6 Channel R/C Set included, Complete Forward/Backward, Left/Right, Up/Down Pitch Control
- New 6 channel Transmitter with PIT and PLT mode lock switch and adjustable knob
- Improved Body Frame(Strong Light)
- Improved Blades Give Superior Lift. To reduct damage during impact, they pop off
- Perfect for intermediate pilots or pilots who want to try inverted fly or 3D aerobatic flight
- CCPM mixing control system and collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
- Bell-Heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic response
- O-ring inside the center hub reduce oscillation of main blades
- High Quality One-Way Bearing Allows for Autorotation Landings
- Adjustable Battery Support, Improved Flight Characteristics
- No Tail Motor - Belt Driven Tail Rotor Provides Stable Flight and Low Noise
- Professional Gyro
- Lightened Skid Set, Main Gear, Main Frame and Canopy Reduce Load and Improves Flight
- PCM Receiving and Transmitting System Increase Operation Stability
- Precision Controlling and Hovering
- Approximately 20 minute Flight Time on Each Charge
In Depth
- Length: 650mm
- Height: 230mm
- Main Rotor Blades diameter: 680mm
- Tail Rotor Blades diameter : 130mm
- Flight Weight: 670g
- Empty Weight: 340g
- Motor: 450 3800KV brushless motor
- Rotate Ratio: 12:140/10:22
- ESC: 25A Digital Proportional brushless speed controller
- Gyro: ESKY professional gyro
- Servo: 8g*4Pcs
- Transmitter: 6-channel
- Receiver: 6-channel
- Battery: Li-poly Battery 1800mAh, 20C, 11.1V
- Mixing: CCPM mode with adjustable pitch system and 3D conversion
- Blades: Light and hardened wood blades provide great lift, only weight 11g
- Assembly: 100% assembled -- 8 AA batteries for the transmitter also included)
In the Box
- BELT CP 6 CH RC HELICOPTER
- 6 Channel CCPM Multifunctional FM R/C Transmitter
- MODE 2, 110V, 72MHZ
- Powerful Brushless Motor
- 100-240V Wall Battery Balance Charger with Auto Cut-Off
- Brushless Motor
- 4 x 7.5G Servos
- Receiver
- 1800MAH 11.1V 20C LIPO BATTERY
- Instruction Manual
Required
- Everything needed is included!
