Xenon Project is no longer in operation.

This website is maintained as reference material and a reminder
of a time before tech monopolies ruined the internet
and coronavirus ruined everything else.
Call us at 888-XENONRC | Open 10AM to 5PM PST Monday-Friday Contact | Support | Blog | Customer Login Tamiya America, Inc 1/8 Racing Buggy Kit: TRF801X
RC Helicopters, RC Cars, RC Airplanes, RC Trucks, RC Boats & RC Toys
You are here: Home > RC Buggies > Nitro RC Buggies > 1:8 > 1/8 Racing Buggy Kit: TRF801X

1/8 Racing Buggy Kit: TRF801X

Tamiya America, Inc 1/8 Racing Buggy Kit: TRF801X

CLICK TO ENLARGE

1/8 Racing Buggy Kit: TRF801X

HH-GWSGPMICRO by Tamiya America, Inc

Retail Price: $1,023.00
You Save $473.01 (46%)

$549.99

Out Of Stock - Check back soon or join our waitlist!

This buggy's highly efficient drive system comes from the optimized placement of the front and rear propeller shafts. The driveline is virtually straight which makes it the most efficient driveline in its class. The TRF801X chassis has plenty of adjustability to fine-tune it for the most demanding of race tracks across the globe. TRF drivers from around the world will be piloting the new competition-level Buggy throughout 2009 in an effort to further develop its potential and a new line of TRF801X option parts.

Specifications:
Length: 495mm
Width: 307mm
Wheelbase: 320-327mm
Gear Ratio: 11.34:1

Features

  • 15-degree engine mount optimizes weight distribution for better lateral weight distribution
  • Two receiver battery locations provide the ability to adjust weight distribution
  • Highly rigid 3mm A7075 anodized duralumin chassis
  • Machined aluminum shock towers, front steering knuckles and engine mount
  • Full ball bearings and chassis side guards
  • Low wear, efficient straight line drivetrain and universal drive shafts
  • Carbon fiber upper deck and servo tray
  • Fully sealed box for electronics
  • Equipped with sealed bevel differential gearboxes
  • Uses spiral cut ring and pinion gears
  • Uses a universal joint for the front and rear drive shafts and the propeller shaft
  • 3-piece centrifuge aluminum dampers and shaft bolts
  • Locknut captured suspension hinge pins
  • 15mm large volume shocks with shaft boots
  • Uses a 17mm hex wheel hub
  • Dual 32mm brakes and a turnbuckle brake linkage system
  • Adjustable turnbuckle linkages
  • Equipped with front and rear stabilizers
  • High-volume air filter
  • 125cc fuel tank
  • Low profile polycarbonate body and a high downforce wing

In Depth

  • Type: 4WD Off-road buggie
  • Scale: 1/8
  • Length: 495mm
  • Width: 307mm
  • Wheelbase: 327mm
  • Fuel Tank Capacity: 125cc

Required

  • .21-.28cc Engine
    Manifold and Pipe
    Fuel Filter
    Nitro Fuel
    Tires & Wheels
    2+ Channel radio system
    (2) High-torque Servos
    6.0V Receiver Battery
    Paint for Polycarbonate Body
    Starter Equipment
    (12) AA Batteries

Review Summary

This product is covered by our limited warranty policy. We stand behind our products and all items are guaranteed to be in working order and fully functional. Any items found to be defective upon arrival will be repaired or replaced free of charge within 60 days of purchase.

Returns or exchanges of new and unused products will also be accepted up to 60 days after the date of purchase.

XenonProject.com 11312 Orchard St. Unit A. El Monte, CA 91731 USA  |  888-XENONRC (888-936-6672) M-F 10AM to 5PM PST© 2012 XenonProject.com
For full size Performance Car Parts, check out our affiliate Silicone Intake Systems.
Tamiya America, Inc 1/8 Racing Buggy Kit: TRF801X Tamiya America, Inc 1/8 Racing Buggy Kit: TRF801X