Xenon Project is no longer in operation.

This website is maintained as reference material and a reminder
of a time before tech monopolies ruined the internet
and coronavirus ruined everything else.
Call us at 888-XENONRC | Open 10AM to 5PM PST Monday-Friday Contact | Support | Blog | Customer Login Mugen Seiki USA 1/8 MBX6T 4WD Nitro Truggy Kit
RC Helicopters, RC Cars, RC Airplanes, RC Trucks, RC Boats & RC Toys
You are here: Home > RC Buggies > Nitro RC Buggies > 1:8 > 1/8 MBX6T 4WD Nitro Truggy Kit

1/8 MBX6T 4WD Nitro Truggy Kit

Mugen Seiki USA 1/8 MBX6T 4WD Nitro Truggy Kit

CLICK TO ENLARGE

1/8 MBX6T 4WD Nitro Truggy Kit

HH-GWSEMM28TS by Mugen Seiki USA

Retail Price: $999.99
You Save $390.00 (39%)

$609.99

Out Of Stock - Check back soon or join our waitlist!

MBX6T Features:

Chassis:
• Hard-anodized 7075-T6 aluminum chassis. The wheel base of the MBX6T is 10mm longer than the MBX5T. The corner speed has greatly improved as well as the overall stability of the MBX6T
• Newly designed chassis braces. The front brace is designed and mounted on the chassis in a location that will best produce the most consistent steering. The rear chassis brace is located so that it will create the most traction and stability too.
• Newly designed side guards will help keep dirt and dust from the inside of the truggy.

Front suspension:
• Quicker and more consistent steering is obtained with new aluminum front wheel hubs.
• More rear traction while at full steering and overall control of the truggy has been created with new upright steering arms and new Ackerman geometry.
• Overall corner speed and handling has been improved with the combination of new front upper and lower suspension arms.
• Full aluminum pivot balls are used for accurate suspension adjustments.

Rear suspension:
• Rear traction has been increased; newly designed aluminum wheel hubs.
• The stability and traction in corning has increased with the new design of the rear suspension and  improved shock location.
• Mud guards that attach to the front of the suspension arm will help reduce dirt and mud attaching to the rear shocks.

Features

  • 3 Diff. Shaft Drive 4WD
  • A70-75 (T6) 3mm Main Chassis
  • F/R Plastic Tension Rod
  • Stone Guard
  • Universal Drive Shafts
  • Lightweight Conical Gear 46T
  • Bevel Gear 10T
  • Aluminum Wheel Hub
  • Aluminum Front Upper Arm Mount
  • Rebound Adj. Screw
  • Rear Mud Guard
  • f15mm F/R Damper Set
  • 4mm F/R Carbon Graphite Damper Stay
  • Low Center of Gravity Fuel Tank (150c.c.)
  • MBX-6T Body

In Depth

  • Type: 4WD Truggy
  • Scale: 1/8
  • Width: 433mm
  • Wheelbase: 373 - 378mm
  • Weight: About 4,000 g

Review Summary

This product is covered by our limited warranty policy. We stand behind our products and all items are guaranteed to be in working order and fully functional. Any items found to be defective upon arrival will be repaired or replaced free of charge within 60 days of purchase.

Returns or exchanges of new and unused products will also be accepted up to 60 days after the date of purchase.

XenonProject.com 11312 Orchard St. Unit A. El Monte, CA 91731 USA  |  888-XENONRC (888-936-6672) M-F 10AM to 5PM PST© 2012 XenonProject.com
For full size Performance Car Parts, check out our affiliate Silicone Intake Systems.
Mugen Seiki USA 1/8 MBX6T 4WD Nitro Truggy Kit Mugen Seiki USA 1/8 MBX6T 4WD Nitro Truggy Kit