Xenon Project is no longer in operation.

This website is maintained as reference material and a reminder
of a time before tech monopolies ruined the internet
and coronavirus ruined everything else.
Call us at 888-XENONRC | Open 10AM to 5PM PST Monday-Friday Contact | Support | Blog | Customer Login Associated Electrics, Inc. B4 Buggy Kit
RC Helicopters, RC Cars, RC Airplanes, RC Trucks, RC Boats & RC Toys
You are here: Home > RC Buggies > Electric RC Buggies > B4 Buggy Kit

B4 Buggy Kit

Associated Electrics, Inc. B4 Buggy Kit

CLICK TO ENLARGE

B4 Buggy Kit

HH-DUB574 by Associated Electrics, Inc.

Retail Price: $299.99
You Save $115.00 (38%)

$184.99

Out Of Stock - Check back soon or join our waitlist!

This all-new buggy reintroduces the forward-swept front end and rear-mounted shock configuration of the original car, optimized with the new co-planar Ackermann steering geometry. This new suspension design provides maximum front-end clearance and minimizes bump-steer while maintaining correct buggy Ackermann angles. Trailing front axle or optional inline steering blocks can be used to adjust steering response. The B4 chassis provides a super-low center of gravity by lowering the motor, battery, wing and even the shock mounting positions, enabling much higher cornering speeds and stability during jumping and through bumpy sections of the track. The adjustable-angle rear wing mounts and even the transmission case are now integrated into the chassis/suspension structure. The symmetrical suspension arm design has all four arms being the same length, and "captured" hinge pins so that no e-clips are used. The transmission has also been optimized into an ultra-compact package, and now uses the same 2.6:1 higher torque-capacity differential as the RC10GT. A double-sided slipper assembly (first prototyped by Team Associated in 1989) has been designed with higher torque capacity, easier assembly, and lower rotating mass than comparable double-sided slippers. This provides a finer adjustment range and more efficient slipper operation. The B4 uses new offset-front wheels and "wide-body" front tires. The rear wheels are now interchangeable with other manufacturer’s buggies, enabling pre-mounted tires for standardized "spec" class racing to easily be used. The B4 is topped off with an all-new, super low-profile body and adjustable rear wing, providing a sleek, aggressive look on the track.

In Depth

  • Type:: Off Road
  • Scale:: 1/10
  • Length:: 366mm
  • Width:: 246mm
  • Wheelbase:: 273mm
  • Weight:: 1199g
  • Chassis:: Composite tub
  • Suspension:: Independent front and rear A-arm
  • Drive Train:: 2WD

Required

  • -R/C 2-channel surface frequency radio system
    -Battery pack (6 cell)
    -Battery charger (peak detection charger recommended)
    -Electronic speed control
    -R/C electric motor
    -Pinion gear


Review Summary

This product is covered by our limited warranty policy. We stand behind our products and all items are guaranteed to be in working order and fully functional. Any items found to be defective upon arrival will be repaired or replaced free of charge within 60 days of purchase.

Returns or exchanges of new and unused products will also be accepted up to 60 days after the date of purchase.

XenonProject.com 11312 Orchard St. Unit A. El Monte, CA 91731 USA  |  888-XENONRC (888-936-6672) M-F 10AM to 5PM PST© 2012 XenonProject.com
For full size Performance Car Parts, check out our affiliate Silicone Intake Systems.
Associated Electrics, Inc. B4 Buggy Kit Associated Electrics, Inc. B4 Buggy Kit