Xenon Project is no longer in operation.

This website is maintained as reference material and a reminder
of a time before tech monopolies ruined the internet
and coronavirus ruined everything else.
Call us at 888-XENONRC | Open 10AM to 5PM PST Monday-Friday Contact | Support | Blog | Customer Login Pro Boat ShockWave 36 RTR w/T-Drive
RC Helicopters, RC Cars, RC Airplanes, RC Trucks, RC Boats & RC Toys
You are here: Home > RC Boats > Nitro RC Boats > ShockWave 36 RTR w/T-Drive

ShockWave 36 RTR w/T-Drive

Pro Boat ShockWave 36 RTR w/T-Drive

CLICK TO ENLARGE

ShockWave 36 RTR w/T-Drive

PN-R-81208 by Pro Boat

Retail Price: $599.99
You Save $230.00 (38%)

$369.99

Out Of Stock - Check back soon or join our waitlist!

Measuring over three feet in length, the Pro Boat® ShockWave® 36 is a ready-to-run deep-V speedster that can reach speeds in excess of 30 mph. The power comes from the installed Dynamite® .32 Marine Engine. The Dynamite .32 Marine is water-cooled and comes equipped with a convenient electric starter and high-performance tuned exhaust system. Control is provided by Pro Boat's trusty pistol-grip radio system that offers drivers analog adjustment of steering rates as well as throttle and steering trim.

The ShockWave's workmanship is equally impressive. The hull is professionally built from fiberglass and painted with the same technologies used in today’s automotive finishes. Rubber motor mounts significantly reduce vibration and lengthen the hull’s life. There are no plastic parts on this boat. All the running hardware is stainless steel and aluminum, including the adjustable trim tabs that let drivers adjust the "ride" for varying wave conditions. Anti-skid fins, an oversized rudder and an adjustable strut for the Pro Boat propeller add even more ride-tuning options.

This is high-octane RC offshore excitement at its best.

Features

  • Water-cooled Dynamite® .32 marine with TigerDrive and electric starter
  • Completely ready-to-run
  • Stainless steel and aluminum running hardware
  • Pro Boat® propeller
  • Pre-painted fiberglass hull
  • Pro Boat® AM 27mHz pistol-grip radio system
  • Speeds over 35 mph

In Depth

  • Length: 36 in
  • Beam: 9 in
  • Engine Size: .32 water-cooled Marine
  • Weight: 6.25 lb
  • Speed: 30 mph
  • Radio: 2 channels
  • Hull Material: Fiberglass
  • Trim Scheme Colors: White
  • Prop Size: 1.90 x 3.0 in
  • Hull Type: Deep-V
  • Kit/RTR: RTR
  • Drive System: Flex shaft
  • Exhaust: Tuned pipe

Required

  • Blue Thunder™ 20% Fuel (quart)
    500cc Fuel Bottle or
    Fast Tap Quart Bottle Spout
    Glow Plug Wrench
    7.2v Battery and charger
    Ni-Cd Glow Driver
    12 AA alkaline batteries (8 for the transmitter and 4 for the receiver)
    Clear tape to seal radio box

Review Summary

This product is covered by our limited warranty policy. We stand behind our products and all items are guaranteed to be in working order and fully functional. Any items found to be defective upon arrival will be repaired or replaced free of charge within 60 days of purchase.

Returns or exchanges of new and unused products will also be accepted up to 60 days after the date of purchase.

XenonProject.com 11312 Orchard St. Unit A. El Monte, CA 91731 USA  |  888-XENONRC (888-936-6672) M-F 10AM to 5PM PST© 2012 XenonProject.com
For full size Performance Car Parts, check out our affiliate Silicone Intake Systems.
Pro Boat ShockWave 36 RTR w/T-Drive Pro Boat ShockWave 36 RTR w/T-Drive