Measuring over three feet in length, the Pro Boat® ShockWave® 36 is a ready-to-run deep-V speedster that can reach speeds in excess of 30 mph. The power comes from the installed Dynamite® .32 Marine Engine. The Dynamite .32 Marine is water-cooled and comes equipped with a convenient electric starter and high-performance tuned exhaust system. Control is provided by Pro Boat's trusty pistol-grip radio system that offers drivers analog adjustment of steering rates as well as throttle and steering trim.
The ShockWave's workmanship is equally impressive. The hull is professionally built from fiberglass and painted with the same technologies used in today’s automotive finishes. Rubber motor mounts significantly reduce vibration and lengthen the hull’s life. There are no plastic parts on this boat. All the running hardware is stainless steel and aluminum, including the adjustable trim tabs that let drivers adjust the "ride" for varying wave conditions. Anti-skid fins, an oversized rudder and an adjustable strut for the Pro Boat propeller add even more ride-tuning options.
This is high-octane RC offshore excitement at its best.
Features
- Water-cooled Dynamite® .32 marine with TigerDrive and electric starter
- Completely ready-to-run
- Stainless steel and aluminum running hardware
- Pro Boat® propeller
- Pre-painted fiberglass hull
- Pro Boat® AM 27mHz pistol-grip radio system
- Speeds over 35 mph
In Depth
- Length: 36 in
- Beam: 9 in
- Engine Size: .32 water-cooled Marine
- Weight: 6.25 lb
- Speed: 30 mph
- Radio: 2 channels
- Hull Material: Fiberglass
- Trim Scheme Colors: White
- Prop Size: 1.90 x 3.0 in
- Hull Type: Deep-V
- Kit/RTR: RTR
- Drive System: Flex shaft
- Exhaust: Tuned pipe
Required
-
Blue Thunder™ 20% Fuel (quart)
500cc Fuel Bottle or
Fast Tap Quart Bottle Spout
Glow Plug Wrench
7.2v Battery and charger
Ni-Cd Glow Driver
12 AA alkaline batteries (8 for the transmitter and 4 for the receiver)
Clear tape to seal radio box
